SYNTAX m4 [OPTION...] [MACRO-DEFINITIONS...] [INPUT-FILE...]
m4 is a macro processor, in the sense that it copies its input to the output, expanding macros as it goes. Macros are either builtin or user-defined, and can take any number of arguments. Besides just doing macro expansion, `m4' has builtin functions for including named files, running UNIX commands, doing integer arithmetic, manipulating text in various ways, recursion, etc... `m4' can be used either as a front-end to a compiler, or as a macro processor in its own right.
The `m4' macro processor is widely available on all UNIXes. Usually, only a small percentage of users are aware of its existence.
However, those who do often become commited users.
Some people found `m4' to be fairly addictive. They first use `m4' for simple problems, then take bigger and bigger challenges, learning how to write complex `m4' sets of macros along the way. Once really addicted, users pursue writing of sophisticated `m4' applications even to solve simple problems, devoting more time debugging their `m4' scripts than doing real work. Beware that `m4' may be dangerous for the health of compulsive programmers.
see info m4 for the full user manual
OPTIONS `--version' Print the version number of the program on standard output, then immediately exit `m4' without reading any INPUT-FILES. `--help' Print an help summary on standard output, then immediately exit `m4' without reading any INPUT-FILES. `-G' `--traditional' Suppress all the extensions made in this implementation, compared to the System V version. `-E' `--fatal-warnings' Stop execution and exit `m4' once the first warning has been issued, considering all of them to be fatal. `-dFLAGS' `--debug=FLAGS' Set the debug-level according to the flags FLAGS. The debug-level controls the format and amount of information presented by the debugging functions. *Note Debug Levels:: for more details on the format and meaning of FLAGS. `-lNUM' `--arglength=NUM' Restrict the size of the output generated by macro tracing. `-oFILE' `--error-output=FILE' Redirect debug and trace output to the named file. Error messages are still printed on the standard error output. *Note Debug Output:: for more details. `-IDIR' `--include=DIR' Make `m4' search DIR for included files that are not found in the current working directory. *Note Search Path:: for more details. `-e' `--interactive' Makes this invocation of `m4' interactive. This means that all output will be unbuffered, and interrupts will be ignored. `-s' `--synclines' Generate synchronisation lines, for use by the C preprocessor or other similar tools. This is useful, for example, when `m4' is used as a front end to a compiler. Source file name and line number information is conveyed by directives of the form `#line LINENUM "FILENAME"', which are inserted as needed into the middle of the input. Such directives mean that the following line originated or was expanded from the contents of input file FILENAME at line LINENUM. The `"FILENAME"' part is often omitted when the file name did not change from the previous directive. Synchronisation directives are always given on complete lines per themselves. When a synchronisation discrepancy occurs in the middle of an output line, the associated synchronisation directive is delayed until the beginning of the next generated line. `-P' `--prefix-builtins' Internally modify *all* builtin macro names so they all start with the prefix `m4_'. For example, using this option, one should write `m4_define' instead of `define', and `m4___file__' instead of `__file__'. `-WREGEXP' `--word-regexp=REGEXP' Use an alternative syntax for macro names. This experimental option might not be present on all GNU `m4' implementations. (*note Changeword::.). `-HN' `--hashsize=N' Make the internal hash table for symbol lookup be N entries big. The number should be prime. The default is 509 entries. It should not be necessary to increase this value, unless you define an excessive number of macros. `-LN' `--nesting-limit=N' Artificially limit the nesting of macro calls to N levels, stopping program execution if this limit is ever exceeded. When not specified, nesting is limited to 250 levels. The precise effect of this option might be more correctly associated with textual nesting than dynamic recursion. It has been useful when some complex `m4' input was generated by mechanical means. Most users would never need this option. If shown to be obtrusive, this option (which is still experimental) might well disappear. This option does *not* have the ability to break endless rescanning loops, while these do not necessarily consume much memory or stack space. Through clever usage of rescanning loops, one can request complex, time-consuming computations to `m4' with useful results. Putting limitations in this area would break `m4' power. There are many pathological cases: `define(`a', `a')a' is only the simplest example (but *note Compatibility::.). Expecting GNU `m4' to detect these would be a little like expecting a compiler system to detect and diagnose endless loops: it is a quite *hard* problem in general, if not undecidable! `-Q' `--quiet' `--silent' Suppress warnings about missing or superflous arguments in macro calls. `-B' `-S' `-T' These options are present for compatibility with System V `m4', but do nothing in this implementation. `-NN' `--diversions=N' These options are present only for compatibility with previous versions of GNU `m4', and were controlling the number of possible diversions which could be used at the same time. They do nothing, because there is no fixed limit anymore. Macro definitions and deletions can be made on the command line, by using the `-D' and `-U' options. They have the following format: `-DNAME' `-DNAME=VALUE' `--define=NAME' `--define=NAME=VALUE' This enters NAME into the symbol table, before any input files are read. If `=VALUE' is missing, the value is taken to be the empty string. The VALUE can be any string, and the macro can be defined to take arguments, just as if it was defined from within the input. `-UNAME' `--undefine=NAME' This deletes any predefined meaning NAME might have. Obviously, only predefined macros can be deleted in this way. `-tNAME' `--trace=NAME' This enters NAME into the symbol table, as undefined but traced. The macro will consequently be traced from the point it is defined. `-FFILE' `--freeze-state FILE' Once execution is finished, write out the frozen state on the specified FILE (*note Frozen files::.). `-RFILE' `--reload-state FILE' Before execution starts, recover the internal state from the specified frozen FILE (*note Frozen files::.). The remaining arguments on the command line are taken to be input file names. If no names are present, the standard input is read. A file name of `-' is taken to mean the standard input. The input files are read in the sequence given. The standard input can only be read once, so the filename `-' should only appear once on the command line.
"Every time a child says they don't believe
in fairies there is a little fairy somewhere that falls down and dies"
awk - Find and Replace text within file(s)
expr - Evaluate expressions
eval - Evaluate several commands/arguments
for - Expand words, and execute commands
grep - search file(s) for lines that match a given pattern
Equivalent Windows NT commands:
DOSKEY - Edit command line, recall commands, and create macros
QBASIC - Quick Basic editor/Interpreter
VB Script - Visual Basic Interpreter
PERL - Perl Interpreter
JAVA - Java pcode